Crosslinked poly(ethylene oxide) containing siloxanes fabricated through thiol‐ene photochemistry

Homogenous amphiphilic crosslinked polymer films comprising of poly(ethylene oxide) and polysiloxane were synthesized utilizing thiol‐ene “ click ” photochemistry. A systematic variation in polymer composition was Carried out to obtain high quality films with varied amount of siloxane and poly(ethylene oxide). These films showed improved gas separation performance with high gas permeabilities with good CO₂/N₂ selectivity. Furthermore, the resulting films were also tested for its biocompatibility, as a carrier media which allow human adult mesenchymal stem cells to retain their capacity for osteoblastic differentiation after transplantation. The obtained crosslinked films were characterized using differential scanning calorimetry, dynamic mechanical analysis, thermogravimetric analysis, FTIR, Raman‐IR , and small angle X‐ray scattering. The synthesis ease and commercial availability of the starting materials suggests that these new crosslinked polymer networks could find applications in wide range of applications. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1548–1557     

Chelate polymers: II. Some novel transition metals complexes with azomethine‐containing siloxanes and their polyesters

New Schiff bases of 2,4‐dihydroxybenzaldehyde with siloxane‐α,ω‐diamines having different numbers of siloxane units in the chain have been synthesized and characterized by spectroscopy, elemental and thermal analyses. These azomethines were found to form complexes readily with copper(II), nickel(II), cobalt(II), cadmium(II) and zinc(II). From IR and UV–Vis studies, the phenolic oxygen and imine nitrogen of the ligand were found to be the coordination sites. Thermogravimetric analysis (TGA) data indicate the chelates to be more stable than the corresponding ligands. The melting points increase with shortening of the siloxane segment from azomethine, as well as the result of complexation. The chelates obtained were covalently inserted in polymeric linear structures by polycondensation through the OH‐difunctionalized ligand with 1,3‐bis(carboxypropyl)tetramethyldisiloxane. Direct polycondensation, assisted either by acetic anhydride or N,N′‐dicyclohexylcarbodiimide as dehydrating agent and the complex 4‐(dimethylamino)pyridinium 4‐toluenesulfonate as catalyst, was used for the synthesis of these compound types. The structures of the polymers obtained were confirmed by IR, UV and ¹H NMR. Characterization was undertaken by TGA, solubility tests and viscosity measurements. Copyright © 2003 John Wiley & Sons, Ltd.     

聚(二甲基硅氧烷-co-甲氧基十二烷基硅氧烷)在棉纤维及其他模型表面的膜形貌及定向排列方式

用场发射扫描电镜(FESEM)、原子力显微镜(AFM)、光电子能谱(XPS)等仪器研究了棉纤维以及再生纤维素表面聚(二甲基硅氧烷-co-甲氧基十二烷基硅氧烷)(DDPS)的膜形貌及其定向排列方式.结果发现,在天然棉纤维以及再生纤维素模型表面,DDPS均能形成宏观上平滑、而微观形态学实则非均一的疏水性硅膜,表明DDPS的定向排列成膜方式为疏水性硅甲基、硅十二烷基朝外伸向空气,硅氧偶极键指向基质界面.     

Chemical and rheological investigations of the sol-gel transition in organically-modified siloxanes

Ormosils are well-known organic-inorganic sol-gel derived materials also called heteropolysiloxanes. This paper presents two basic heteropolysiloxane structures where the organic part is either a short organic chain bridging two silicon atoms for the first material or an organic polymer backbone for the second. Their synthesis is detailed and a variety of experimental techniques (IR, ¹³C and ²⁹Si NMR and CP-MAS NMR, GPC) have been employed to investigate the chemical structure of these new materials. Their mechanical properties, more precisely their viscoelastic behaviour, have been evaluated using dynamic rheological techniques. The storage and loss moduli have been followed during the sol-gel transition at fixed and variable oscillation frequencies. The results have been correlated to the ²⁹Si CP-MAS NMR informations concerning the network polycondensation and compared to a pure inorganic sol-gel material prepared from tetraethoxysilane.     

Description of the turbidity measurements near the phase transition temperature of poly(N-isopropyl acrylamide) copolymers: the effect of pH, concentration, hydrophilic and hydrophobic content on the turbidity

Absorbance values between 300 and 800 nm of aqueous solutions of poly(N-isopropyl acrylamide-co-itaconic acid-9.80), poly(N-isopropyl acrylamide-co-itaconic acid-52.05) and poly(N-isopropyl acrylamide)s containing Tegomer H-Si 2111 end groups and/or blocks were measured using a Shimadzu 160-A UV-visible spectrometer. Turbidities obtained from these absorbance values were used to interpret the macromolecular phase transition from a hydrophilic to a hydrophobic structure of the polymers. The effects of comonomer type and content, concentration of the solutions, pH and temperature on the coil-globule transition were discussed in terms of turbidity form factor, β related to size and shapes of particles and calculated by using the simplified form of Debye equation.The results presented in this work show that the presence of Tegomer H-Si 2111 (Si containing end groups and/or blocks) or high amount of itaconic acid (IA) in the chains prevent a collapse transition from hydrated extended coils to hydrophobic globules, which aggregate and form a separate phase (β<2). Furthermore, it was observed that in the case of concentrated solutions intermolecular hydrophobic interactions between isopropyl groups overcame the repulsive forces resulting from the ionized carboxylic acid groups of IA or surface active nature of Si containing hydrophobic groups (β>2). This stage of the transition corresponds to macroscopic phase separation after an intramolecular process.     

Comparison of polydimethyl siloxane stationary phases with 5% and 50% phenyl substitution for the separation of organophosphorus and organonitrogen pesticides under optimized gas chromatographic conditions

The CGC analysis of 25 organophosphorus and organonitrogen pesticides was optimized on two different stationary phases, namely a 5% diphenyl dimethyl silicone (SE-54 type) and a 50% diphenyl dimethyl silicone (OV-17 type) by selecting the best temperature program conditions, using computer simulation.     

三甲基硅基化反应的研究

本文研究了以水玻璃作为硅酸盐阴离子,按Lentz方法进行的三甲基硅基化反应。在改变反应克分子比例时,可得到不同分子量和硅基化程度的硅树脂,由此说明,在硅基化反应时可能发生聚合、解聚和水解等副反应。对影响硅树脂产率的反应条件和三甲基硅基化树脂的一些物理性质也进行了讨论。     

Perfectly alternating segmented polyimide-polydimethyl siloxane copolymers via transimidization

New strategies for the synthesis of perfectly alternating segmented polyimide-polydimethyl siloxane copolymers were developed by utilizing a transimidization method. Imide oligomers endcapped with 2-aminopyrimidine were reacted with aminopropyl terminated (dimethyl siloxane) oligomers to afford perfectly alternating segmented imide siloxane copolymers. The polymerization was conducted in solvents such as chlorobenzene and chlorofrom. High molecular weight, fully imidized perfectly alternating segmented imide siloxane copolymers were obtained within 2 h at temperatures of 60-110°C. The mechanism of the reaction was further elucidated via model compounds and NMR characterization. The block copolymers exhibited two T_gs due to the microphase separation of the polyimide and polysiloxane phases. The T_g of the polyimide phase was a function of the length of the polyimide block. However, partial phase mixing was also evident from the DSC results on the imide siloxane copolymers prepared with low molecular weight polyimide segments. Thermooxidative stability and tensile properties of the perfectly alternating segmented imide siloxane copolymers were found to be principally dependent on the amount of poly (dimethyl siloxane) incorporated in the copolymer and did not correlate with the poly (dimethyl siloxane) or polyimide block lengths. The stress-strain behavior of both solvent cast films or molded films is also reported. © 1994 John Wiley & Sons, Inc.     

Preparation and characterization of fused-silica capillary columns coated with <Emphasis Type="Italic">m</Emphasis>-carborane–siloxane copolymers for gas chromatography

The carborane–siloxane copolymers Dexsil 300, a 34.5% bis(dimethylsilyl)-m-carborane–65.5% dimethylsiloxane copolymer, and Dexsil 400, a 24.9% bis(dimethylsilyl)-m-carborane–50.8% dimethyl, 24.3% methylphenylsiloxane copolymer, were coated on fused silica capillary columns and their gas chromatographic properties were evaluated. Their selectivity was evaluated using both Rohrschneider–McReynolds constants and triacylglycerol indices. The bis(dimethylsilyl)-m-carborane unit turned out to be equivalent to two dimethylsiloxy units and one half of a diphenylsiloxy unit. The m-carborane unit was found to cause a 15–25 K shift in the elution temperature between 120 and 360 °C. The working range was from 20 and 0 °C to 380 °C for Dexsil 300 and Dexsil 400, respectively. The column bleeding levels at 380 °C were below 20 and 15 pA for Dexsil 300 and Dexsil 400, respectively.     

有机硅改性聚氨酯的合成与性能

在无溶剂条件下利用二步法合成了一系列氨基硅油改性聚氨酯,采用红外光谱对预聚体进行了表征,同时测试了材料的力学性能、耐热性、表面水接触角及微观形态,结果表明,改性后的聚氨酯具有优良的力学性能、耐热性及表面疏水性,且材料呈微观相分离形态。